I like to have colorful book covers for my handmade books. I have a supply of library quality book cloth, but it is solid-colored, boring, institutional looking, but it’s very sturdy.  I also have some nice Japanese papers that I use to cover book board as well. But sometimes I want a cloth cover, but not a plain one. I found some videos on YouTube that showed a way to make book cloth from regular fabric. The videos I learned from are listed below.

The supplies you will need are:

• A Fat quarter from the fabric store or a half yard of fabric

A fat quarter, if you don’t know, is a specific cut from a yard of fabric. It is not the same as a quarter yard. When you order a quarter yard, you get a cut of fabric 9 inches in length across the width of the cloth. A fat quarter comes from a yard of fabric cut lengthwise and widthwise to make 4 equal sized pieces of fabric, 18 by 18 inches for 36-inch-wide fabric or 18 by 22 inches for 45-inch-wide fabric. Fat quarters are readily available in fabric and craft stores and in the sewing section of Walmart and similar stores for under $3.00 US.

• Lightweight fusible interfacing – the double-sided kind. One side will be fused to the fabric and the other to the next item on the list. The interfacing can be found in the fabric by the yard section of the fabric stores and as a 1-yard pre-packaged cut in the crafts area of other stores.
• White tissue paper. You want white because the dye used for colored tissue tends to bleed if it gets wet.

You will also need:

• An ironing board
• A pressing cloth
• An Iron
• A cutting mat
• A ruler or yard stick
• A rotary cutter or scissors

Wash and dry your fabric to remove any sizing. I usually wash all my fat quarters at one time, iron them, and fold them once and lay them on a clothes hanger for later. Place your fabric on the ironing board with the wrong side up. Iron out the creases and wrinkles using the steam setting. Cut the interfacing slightly larger than the fabric. Lay the interfacing with the paper liner side up. Turn off the steam setting or empty the iron. Press according to the instructions on the interfacing package. Follow the package directions fir when to peel off the backing paper. Peel the backing paper off and cover with the tissue paper. Iron again to attach the tissue paper. When cool, trim the tissue paper edges flush with the fabric using your rotary cutter or scissors. Roll the book cloth into a tube to avoid creases and store until needed. Use like regular book cloth.

 

Treasure Books

Nik the Booksmith